A facile approach to fabricate and embed multifunctional nano ZnO into soap matrix and liquid cleansing products for enhanced antibacterial and photostability for health and hygiene applications

This research demonstrates, a facile approach to fabricate the nano ZnO system in an unique combination of surfactant-polyol-assembly (SPA) acting as a caging agent restricting the ZnO crystallite size in nano-regime. This SPA is suitable for health and hygiene products and such optimized technique is among the very few researches exploring the impact of embedding low concentrations of nano ZnO system into the matrix of sodium salt of long chain fatty acids (soap bar) and liquid cleansing personal care products. The fabricated nano ZnO in SPA and infused products were systematically characterized using various advanced and appropriate techniques. The hexagonal wurtzite structure of nano ZnO-SPA is evaluated based on XRD pattern which also exhibit an average crystallite size as 20.18 nm and high specific surface area as 52.99 m²/g. The SEM-supported morphological assessment confirms the formation of agglomerates of ultrafine ZnO rods and spherical particles. Novel nano ZnO having wideband gap energy (3.66 eV) embedded in soap bar act as a UV-blocker preventing the oxidation of unsaturated long chain fatty acids. Soap bar without ZnO experienced degradation and reduction in whiteness to 17.85% whereas 2.5 mg/g nano ZnO infused soap shows the reduction to 7.9% which clearly reflects the increased photostability of soap bar. The antibacterial efficacy of nano ZnO-SPA and infused products are investigated against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) by Zone of Inhibition (ZOI) and European standard EN:1276. Infused products exhibited high antibacterial efficacy up to 4.43 log reduction equivalent to >99.99% germ kill.     

Kinetic model for Ostwald's rule of stages with applications to Boc-diphenylalanine self-assembly

A kinetic model which describes Ostwald's rule of stages, during the process of crystal growth from solution, is reported here. Reaction equations for stages are given where the stages convert from one to another. The final stage reacts to release a portion of solute back into solution, while the remainder converts to the final equilibrium form. Additionally, a remnant of the solute that was not consumed by any of the transitional stages, ultimately is converted into the final product. This particular model was motivated by a recent report for Boc-diphenylalanine self-assembly where the dissolved peptide was observed to go through two polymorphic stages before reaching the equilibrium supramolecular assembly [A. Levin et al., Nat. Commun. 5, 5219, (2014)]. Kinetic data for the concentration of solute present during the process are listed in the above-mentioned report. We show here how the model, for , describes the time-dependent behavior of the solute decay during the growth process. After comparing the model to the experimental data, we are able to report values for all of the rate constants and propose a rule whereby the relative magnitudes of these constants can be used to predict whether a supersaturated substance will noticeably pass through transitional stages or simply convert from solute to the equilibrium solid form.     

The Spin Modulation Stimulated Efficient Electrocatalytic Oxygen Evolution Reaction over LaCoO3 Perovskite

Perovskite is a promising non-noble catalyst and has been widely investigated for the electrochemical oxygen evolution reaction (OER). However, there is still serious lack of valid approaches to further enhance their catalytic performance. Herein, we propose a spin state modulation strategy to improve the OER electrocatalytic activity of typical perovskite material of LaCoO₃. Specifically, the electronic configuration transition was realized by a simple high temperature thermal reduction process. M-H hysteresis loop results reveal that the reduction treatment can produce more unpaired electrons in 3d orbit by promoting the electron transitions of Co from low spin state to high spin state, and thus lead to the increase of the spin polarization. Electrochemical measurements show that the catalytic performance of LaCoO₃ is strongly dependent on its electronic configuration. With the optimized reduction treatment, the overpotential for the OER process in 0.5 M KOH electrolyte solution at 10 mA cm⁻² current density was 396 mV, significantly lower than that of the original state. Furthermore, it can mediate efficient OER with an overpotential of 383 mV under an external magnetic field, which is attributed to the appropriate electron filling. Our results show that electron spin state regulation is a new way to boost the OER electrocatalytic activity.     

Enhanced spin capturing polymerization: Numerical investigation of mechanism

Simulation on the kinetic scheme of enhanced spin capturing polymerizations (ESCP) were performed to reveal the influence of different parameters, e.g., initiation rate, spin capturing and side reactions on the properties (the monomer conversion, degree of polymerization, polydispersity index, and the fraction of “living” chains) of polymer obtained. The kinetic scheme of ESCP was solved numerically as well as the method of statistical moments of molecular weight distribution was applied to get some numerical expressions for analysis. The simulations showed that fast initiation rate can lead to decrease of living fraction and broadening of molecular weight distribution. Whereas high rate of spin capturing makes the polymer chains shorter but increases living character. And side reactions always decrease livingness of the polymer obtained. Finally in the case of absence of side reaction we were able to formulate criteria for formation of polymer with target molecular weight and quota of living chains via ESCP process. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2546–2556     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

Effect of chain architecture on the phase transition of star and cyclic poly(N‐isopropylacrylamide) in water

The heat‐induced phase transition of aqueous solutions of Poly(N‐isopropylacrylamide) (PNIPAM) in water is examined for a four‐arm PNIPAM star (s‐PNIPAM), a cyclic PNIPAM (c‐PNIPAM), and their linear counterparts (l‐PNIPAM) in the case of polymers (1.0 g L^?1) of 12,700 g mol^?1 < M_n < 14,700 g mol^?1. Investigations by turbidity, high‐sensitivity differential scanning calorimetry (HS‐DSC), and light scattering (LS) indicate that the polymer architecture has a strong effect on the cloud point (T_c: decrease for s‐PNIPAM; increase for c‐PNIPAM), the phase transition enthalpy change (ΔH decrease for s‐PNIPAM and c‐PNIPAM), and the hydrodynamic radius of the aggregates formed above T_c (R_H: c‐PNIPAM < s‐PNIPAM < l‐PNIPAM). The properties of s‐PNIPAM are compared with those of previously reported PNIPAM star polymers (3 to 52 arms). The overall observations are described in terms of the arm molecular weight and the local chain density in the vicinity of the core of the star, by analogy with the model developed for PNIPAM brushes on nanoparticles or planar surfaces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2059–2068.     

Electronic Structure Modulation in an Exceptionally Stable Non‐Heme Nitrosyl Iron(II) Spin‐Crossover Complex

The highly stable nitrosyl iron(II) mononuclear complex [Fe(bztpen)(NO)](PF₆)₂ (bztpen=N‐benzyl‐N,N′,N′‐tris(2‐pyridylmethyl)ethylenediamine) displays an S=1/2?S=3/2 spin crossover (SCO) behavior (T_1/2=370 K, ΔH=12.48 kJ mol^?1, ΔS=33 J K^?1 mol^?1) stemming from strong magnetic coupling between the NO radical (S=1/2) and thermally interconverted (S=0?S=2) ferrous spin states. The crystal structure of this robust complex has been investigated in the temperature range 120–420 K affording a detailed picture of how the electronic distribution of the t_2g–e_g orbitals modulates the structure of the {FeNO}⁷ bond, providing valuable magneto–structural and spectroscopic correlations and DFT analysis.     

Surplus division and investment incentives in supply chains: A biform-game analysis

In this paper, we use a biform-game approach for analyzing the impact of surplus division in supply chains on investment incentives. In the first stage of the game, firms decide non-cooperatively on investments. In the second stage, the surplus is shared according to the Shapley value. We find that all firms have inefficiently low investment incentives which, however, depend on their position in the supply chain. Cross-subsidies for investment costs can mitigate, but not eliminate the underinvestment problem. Vertical integration between at least some firms.yields efficient investments, but may nevertheless reduce the aggregated payoff of the firms. We show how the size of our effects depends on the structure of the supply chain and the efficiency of the investment technology. Various extensions demonstrate that our results are qualitatively robust.     

Carbon fibers prepared from tailored reversible‐addition‐fragmentation transfer copolymerization‐derived poly(acrylonitrile)‐co‐poly(methylmethacrylate)

Reversible‐addition fragmentation‐transfer (RAFT) polymerization of acrylonitrile (AN) was performed with 2‐(2‐cyano‐2‐propyl‐dodecyl)trithiocarbonate as RAFT agent and azobis(isobutyronitrile) as initiator. Linear polyacrylonitrile (M_n = 133,000 g/mol, PDI = 1.34) was prepared within 7 h in 86% isolated yield. High‐yield copolymerization with methyl methacrylate (MMA) was performed and copolymerization parameters were determined according to Kelen and Tüdös at 90 °C in ethylene carbonate yielding r_AN = 0.2 and r_MMA = 0.42. The molecular weights, polydispersity indices (PDIs), and MMA content of the copolymer were adjusted in a way that precursor fibers could be prepared via wet spinning. These precursor fibers had round cross‐sections and a dense morphology, showing tenacities of 40–50 cN/tex and elastic moduli of 900–1000 cN/tex at a fineness of 1 dtex and an elongation of 13–17%. Precursor fibers were oxidatively stabilized and then carbonized at different temperatures. A maximum tensile strength of 2.5 GPa was reached at 1350 °C. Thermal analysis, infrared and Raman spectroscopy, wide‐angle X‐ray scattering, scanning electron microscopy, and tensile testing were used to characterize the resulting carbon fibers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1322–1333